<\/span><\/h2>\n<\/p>\n
The monthly tasks are more intricate than the daily and weekly tasks. The monthly schedule includes balancing chemicals and a more intensive cleaning process. We have mentioned all the chemicals that you need to keep track of to maintain your saltwater pool.<\/p>\n
Salinity Level<\/h3>\n
The salinity levels are very crucial for a saltwater pool. The normal salinity range is somewhere between 2700-4500 rpm. However, all salt cell generators differ significantly. The pool owners must thoroughly go through the manufacturer’s instructions to confirm the pool salt levels.<\/p>\n
When the salt level is low, all you have to do is add more salt. However, if the salt concentration is high, you have to dilute it with more water. Do not add the salt or dilute the water without knowing the right amount.<\/p>\n
Cyanuric Acid<\/h3>\n
The cyanuric acid or CYA does the stabilizing job for your saltwater pool. A proper CYA level ensures that the UV rays are not hampering the chlorine levels in your pool.\u00a0 A pool without a stabilizer can lose almost all its chlorine on a sunny day.<\/p>\n
A saltwater pool requires high levels of CYA for the best results. The CYA must be around 70 and 80 ppm. Lowering the CYA is not as easy as increasing it. You can adjust the low CYA level by adding more products to it.<\/p>\n
The only way to bring down the CYA level is by diluting the water. So, you can drain the pool water a bit and add some fresh water. Although, if the concentration is not significantly high, you can wait a couple of days for the pool to correct itself.<\/p>\n
Calcium Hardness<\/h3>\n
A saltwater pool with a high calcium level can lead to corrosion and severe damage. The perfect range of calcium is 200-400 ppm. Lowering calcium levels is challenging, but you can still do it. The best method to control the calcium level is by draining out some pool water and adding fresh water.<\/p>\n
However, this is an expensive process. Another way to take care of calcium level is by using flocculant. It\u2019s best if you leave the job of handling calcium hardness to a professional.<\/p>\n
Alkalinity<\/h3>\n
The pool’s alkalinity and pH should be in sync to keep your saltwater pool safe and clean. If your pool water looks cloudy, this means that the alkalinity is high. On the flip side, if the alkalinity is low, it can damage and cause corrosion in your pool.<\/p>\n
The perfect alkalinity range for saltwater pools is 80 to 120 ppm. To reduce alkalinity, you can use muriatic acid or sodium bisulfate. For increasing the alkalinity, you can add sodium bicarbonate. You have to be patient to notice changes in the alkalinity levels in your pool.<\/p>\n