Table of Contents
There is nothing better on a hot sunny day than being able to grab your bubble bath, towel and shower gel, and jumping inside your pool. It is the dream of every house owner to have a pool inside their property. It’s easy to fantasize about hosting pool parties for friends every weekend, and spending long afternoons inside the pool to relax your body, but there is one aspect that comes along with the pool too and that, of course is, a proper maintenance routine. You need to pay attention to the cleaning of your pool for the same reasons you clean your bathtub for. However, a crystal clear pool just doesn’t happen in one single night. You have to put an effort into it and play with the pool’s chemistry to make sure that it gets rid of debris and the water stays clean.
Below are some pool maintenance tips that you need to follow.
Do Scrubbing and Skimming Regularly
You should skim the leaves and any debris off the surface of the pool and make it a regular routine. You can buy a robot vacuum to make things easier for you as the vacuum will clean the pool to the bottom. You must also scrub the sides of the pool to prevent the formation of algae. However, scrubbing the sides of the pool is something that you need not to do on a regular basis, just twice or thrice a week. If there are any stubborn spots in your pool having grease, you can fill them up with chlorine and let the chlorine sit over there for a few hours before you can scrub again.
If you are someone who is looking for a pool lid, get the best one installed at pool installation services in Melbourne.
Consistent Chemical Levels
Having a pool isn’t all about just filling it with water and ending the story over there. You need to keep a sharp check on the pool’s chemistry as it requires a consistent level of some chemicals. Water having unbalanced chemicals causes trouble by irritating the skin, your eyes and can also welcome bacteria. You should have a chemical testing kit and check the concentration of different chemicals at least one a week by testing the water. Below are the essential chemical levels that have to be considered.
- Acidity/Alkalinity
- Calcium Hardness
- Total Alkalinity
- Free Chlorine
- Cyanuric Acid
- Free Chlorine
Adjust the concentration of the above mentioned chemicals as needed if you see their concentration over or below the normal range.
Keep an Eye on Water Level
It is imperative that you keep a sharp eye on the water level. Water levels keep on fluctuating for e.g., right after a storm has hit. You need to have a water level that is just halfway up the skimmer. If your water level is too low, add the necessary amount by using a garden horse. If it’s too high, drain the excess. After you have normalized the water level, it is important to check the concentration of chemicals again.
